Canon EOS 1D Mark II 100m Wireless Remote WR100A
Item Number : CanonEOS1DIIWR100A
Overview
Canon EOS 1D Mark II 100m Wireless Remote WR100A is ideal for any Canon EOS 1D Mark II owner. Use this Canon EOS 1D Mark II wireless remote control to get closer to your wildlife subjects without disturbing them.
RS-80N3 compatible JJC Wireless Remote Control 100m (WR-100A). WR-100A remote control is a long range JJC Wireless Remote Control that works with the high end range of Canon cameras (please check our compatibility section. This wirless remote shoot ideal for indoor and outdoor photography it fits to your hot shoe connection.
Features
Long-distance wireless remote control; the controller does not need to face the camera
Can attach to the camera accessory shoe (speedlight shoe).
Maximum for shutter release: up to 100m (320ft)
Maximum for auto-focusing: up to 80m (256ft)
Millions of communication codes allowing interference free operation
Powered by a in-built rechargeable lithium battery
Very power efficent; one recharge can provide two months worth of power or 50,000 shutter releases
Supplied with an intelligent multi-voltage (100-240v) charger with LED indicator
Specification
TRANSMITTER
Weight Approx 31g
Operating temp 0 °C–40
Dimensions Approx 35 mm
Battery type: 23A/12V
RECEIVER
Weight Approx 81g
Operating temp 0 °C–40 °C (32 °F–104 °F)
Dimensions Approx 43 mm × 15 mm × 105 mm (excluding cable
Length of cord Approx 100 cm (expand)
Two Components
It is composed of two parts: One receiver that connects to the cable release socket of the cameras, and one transmitter. The receiver can trigger the camera’s shutter, focus and long exposures and the transmitter is used to trigger the camera’s shutter and focus within 100 meters. With new Design, the receiver can attach to the camera accessory shoe (speedlight shoe). The receiver inbuilt a High Capacity Li-ion battery and there are 5 LED lights to indicate battery status, each light represent 20% of battery power.
Transmitter
The Transmitter inbuilt two buttons
1. One for the shutter
2. One for the auto focus
Receiver
The receiver also is a Remote Switch with a two step shutter button - half press for focus, full press for shutter. You can also shift the Mode Dial to L mode and the reciever will lock the shutter for long exposures (Bulb Mode).
If you shift the Mode Dial to W the receiver becomes active, and you can use the transmitter to control the shutter or focus.
If you shift the Mode Dial to O. the receiver will become a normal remote switch and the receiver will not consume any power.
Maximum operating range 100m. (The operating range may be reduced due to obstructions or interference with other electronic equipment)
Whats Included
JJC Canon Wirless Remote Control (WR-100A)
1 x Wireless receiver
1 x Wireless Transmitter
